Rain Drop Test Chamber
RAIN DROP TEST CHAMBER
This Rain Drop Test Chamber aims to provide an excellent rain drop environment to simulate & reproduce an artificial rain weather to verify enclosure performance of electrical and electronic products if the product with their component and parts still with excellent performance after rain drop test.
This Rain Drop Tester complies with test requirement of IPX5,IPX6,IPX7 standards.
With scientific design, this rain drop test chamber can simulate various rain weather conditions such as water drop, water fall, water shower, water spray and water jet.
Thanks to advanced control system as well as frequency converting technology, this rain drop test is available to control and regulate rotary angle of test specimen rack, swing angle of water spray swing bar as well as water spray frequency.
Water Spraying System is designed with water pump, water pressure gauge, fix-type spray pipe and 4 sprayers are installed.
Water tank is made of SUS304 stainless steel while external test chamber made of stainless steel square steel with tempering glass.
|Tester Name||Rain Drop Test Chamber|
|Overall Dimension((D×W×H)||1500×1500×3600 mm|
|Water Tank(D×W×H)||800×1300×500 mm|
|Pipe Diameter||0.5 Inch|
|Spray Hole Size||φ6.3mm (IP5 Grade)|
|Water Spray Pressure||300~100kpa (Controllable)|
|Water Spray Hole Size||φ12.5mm (IP6 Grade)|
|Water Spray Flow||12.5±1~100±5(L/min)|
|Continuous Water-Spray Cycle||3,10,30min (Available To Set)|
|Test Cycle Setting||1s~99h99min. Controllable)|
|Water Drop Direction||Aim To Surface of Product|
|Water Spray Meter||Available to display water spray pressure|
|Control system||Touch Panel Control System|