Bench Top Constant Temperature & Humidity Test Chamber
BENCH TOP CONSTANT TEMPERATURE & HUMIDITY TEST CHAMBER
External test chamber is made of dual-side high-temperature electrostatic resin paint galvanized metal sheet, while internal test chamber is designed with SUS#304 high-low temperature resistance stainless steel material with its bottom with SUS#304 stainless as well as high-strength square tube connection reinforcement.
Insulation material, in accordance with special heat-resistance purpose, is selected from frame retardant high strength PU polyurethane foam insulation material.
Single door design with its size as width at 500mm and length at 600mm, is designed with observation window on test chamber door. Door frame is designed heat resistance, anti-frosting, anti-condensing devices to enable test technician have a good observation view of complete test process.
Cable Hole (Test hole) with its diameter at 50mm on left of test chamber with silicone sealing and stainless steel cover is made and cable hole at 100mm for optional.
To achieve an excellent test result, sealing process for test chamber is made with silicone rubber strip; sample holder with load-bear capacity of more than 20kg per layer.
Air Supply System with constant air flow as well as uniform air distribution is driven by branded asynchronousmotor, multiple-blades centrifugal circulating blower as well as high-performance sensors.
Refrigeration System is introduced with French Tecumseh compressor for dehumification while Germany Bitzer compressor for refrigeration system,while use environmental friendly refrigerant HFC R404A, R23A.
Heating System is designed with SSR (Solid-State Relay) &controller to provide high accurate non-contact switch control, and the heating tube introduced with Naked Wire Nickel Chromium Alloy Electric Heating Tube.
Control Method for walk-in Test Chamber is introduced with Programmable high accuracy micro computer controller, use cold mirror dew point instrument control temp. humidity system. cold mirror dew point instrument control temp. Humidity system.
P.I.D. ,BTC balance temperature control method(thermal compensation function)+DDC digital cold control +DEC digital electric control (Temperature change test program setting) .
|Internal Dimension (W×H×D)mm||400×450×280||400×450×400|
|External Dimension (W×H×D)mm||600×850×1250||600×850×1400|
|Temp. Range:||Low Temperature: A: 25℃；B: 0℃;C: -20℃; D: -40℃ E:-60℃ High Temperature: 150℃ （200℃ Optional)|
|Analytic Accuracy||0.1℃; 0.1% R.H|
|Uniformity||±2.0℃; ±3.0% R.H.|
|Control Accuracy||±0.5℃; ±2.5% R.H.|
|Temperature Rising/Falling Speed Rate||Temp. Rising Approx 1.0~3.0 ℃/min; Temp. Cooling Rate 0.5~1℃/min.|
|Temperature Humidity Control Graph|
|Machine Material||Inner with SUS #304 Stainless steel , External with SUS#304 Stainless steel or Cold-rolled powerder coated material .Insulation material with Polyurethane material .|
|Cooling System||Air cooling|
|Compressor||Fren ch Tecumseh ; German Bitzer ; Japan Mitsubishi|
|Protection Devices||Fuse-free switch, overloading protection switch for compressor, high and low voltage coolant protection switch, over-humidity and over-temperature protection switch, fuses, fault warning system, water short storage warning protection|
|Optional Accessories||Inner door with operation hole , Recorder, Water Purifier, Dehumidifier|
|Power Source||AC220V , 1ph 3 lines, 50/60HZ , AC380V 3P 5 lines , 50/60HZ|